LOADBOND STANDARD

Loadbond standard is a styrene based polyester resin which is a high performance, rapid curing two part chemical anchoring system.

Applied in one single action this resin will produce an economical strong, chemical resistant fixing.

This resin is ideal in block work, hollow brick and is a general all round chemical fixing.

We supply his resin in a 380ml co-axial cartridge, it is supplied with one nozzle and is ready to use as it mixes in the nozzle when being used.

This resin has a very distinct odour and is best suited to external dry applications or internal large areas with plenty of well ventilated air flow.

LOADBOND HIGHLOAD

Loadbond epoxy acrylate strene free low odour resin is a high performance, rapid curing two part chemical anchoring system based on epoxy acrylate.

Applied in one single action this resin will produce a cost effective, strong chemical resistant fixing.

A very good resin for damp and wet applications, this resin is ideal for medium to heavy duty load applications.

Non-flammable & non-hazardous, ideal for indoor usage due to it’s low odour.

LOADBOND STANDARD EXTRA

Loadbond polyester styrene free low odour resin is a high performance, rapid curing two part chemical anchoring system based on polyester.

Applied in one single action this resin will produce a cost effective, strong chemical resistant fixing.

Due to it’s low odour resin this resin is ideal for indoor use, ideal for use in concrete, hollow wall/pot, brickwork and masonry.

LOADBOND HIGHLOAD EXTRA

Loadbond highload extra is a ETA vinylester low odour rers very high resin which offers very high performance loads. It is a rapid curing two part chemical anchoring system based on a high reactivity vinylester. Like all ACS resins it is applied in one single action this resin will produce a cost effective, strong chemical resistant fixing.

Ideal for extreme safety and critical loads, very well suited for overhead applications, has European technical approval (option 7)

Has a very high chemical resistance and is guaranteed for 50 years working life of the anchor.

LOADBOND ULTIMATE

Loadbond pure epoxy 1.1 resin is a high performance, two component epoxy resin system. Applied in one single action this resin will produce a very high performance, strong fixing with exceptionally high chemical resistance.

Ideal in wet and underwater applications, this resin is a WRAS approved product, ideal for deep rebar holes as this resin offers longer working times over the other resins listed on this page.

Has the highest durability of any resin, solvent free, odourless & no shrinkage.

LOADBOND HIGHLOAD EXTRA

Loadbond highload extra is a ETA vinylester low odour rers very high resin which offers very high performance loads. It is a rapid curing two part chemical anchoring system based on a high reactivity vinylester. Like all ACS resins it is applied in one single action this resin will produce a cost effective, strong chemical resistant fixing.

Ideal for extreme safety and critical loads, very well suited for overhead applications, has European technical approval (option 7)

Has a very high chemical resistance and is guaranteed for 50 years working life of the anchor.